An intelligent dry mist robot could atomize a variety of disinfectants into super dry mist and disperse to disinfection area in high-speed airflow.
It could reach the disinfection area by autonomous navigation, obstacle avoidance, and movement, and disinfect the target 360°.
It could also support iPad control for quick and central disinfection. Using this disinfection method by a robot could save manpower and lower the infection risk effectively; it could make disinfection more efficient and improve safety greatly.
AITY Automatic AI Intelligent Sanitizer Robot Dry Mist 5B can reach the working area by autonomous navigation, obstacle avoidance, and moving, and work around the area target 360 degrees without a dead angle. At the same time, it supports iPad remote control, which can quickly and intensively work in regional places (fog making and purple light irradiation).
Through the thermal imaging temperature measurement principle, the robot can detect group body temperature in real-time, and lock high-risk patients, voice alarm, manual remote monitoring, temperature measurement accuracy ±0.3°C.
THREE WORKING MODES:
Task mode fixed time and fixed point disinfection:
Use the task configuration function to configure the robot with disinfection area, disinfection time, and disinfection frequency.
As long as the machine disinfectant is sufficient, to set the time, the robot can be unmanned
Next, self-planning path, obstacle avoidance walking, intelligent disinfection, and in the power shortage
In this case, the robot can return to the pile for charging.
Instruction mode disinfection:
The robot is equipped with a 12-inch high-definition display screen, which can visually display the well-maintained disinfection area
Field and point, you can touch and send instructions to disinfect specific points or areas.
IPad remote control disinfection
The robot is equipped with an iPad, which can remotely control the robot for automatic disinfection and support no network
Environment intelligent remote control.
Automatic lifting nozzle multi-angle three-dimensional spray, 360 "no dead corner
Ultra dry atomized disinfectant has good dispersibility and full coverage, reaching 6-log level
1000m space, the fastest 15 minutes to complete disinfection
You can use the task configuration tool to configure the task time path for the robot on site
Line content, walking frequency, task planning, etc
Automatic disinfection, the key, control or timing tasks start the automatic disinfection process
It can monitor the working condition of the robot at any time, save the working record automatically, and navigate autonomously,
Intelligent obstacle avoidance and free from manual operation
*Ultra dry atomized disinfectant, no residue in the disinfection process, safer
Human-machine separation, reduce personnel contact, effectively reduce the risk of infection
NAVIGATION OBSTACLE AVOIDANCE SYSTEM:
Optimal path planning for autonomous navigation obstacle avoidance
The robot is based on slam stereo navigation obstacle avoidance system
The detection distance is not less than 15m, and the surrounding area is scanned at all times
Environment, providing map data, building high-precision environment map,
Autonomous navigation, autonomous obstacle avoidance, and planning the optimal route destination.
Automatic lifting 360 Degree No dead corner coverage
The top of the robot is equipped with 6 heads of spray heads to ensure 360 coverage and no dead ends.
With automatic lifting, ultraviolet lamps on both sides can automatically rise to the highest position during operation,
When the operation is finished, it will automatically retract to its original position.
Rise to a high point to ensure wider disinfection space
The distance between dew making and dew spraying is far, which ensures that there is enough space for the fan to speed up the single gas output
The nozzle shrinks to the inside of the fuselage, making transportation and storage safer and more convenient.
Large capacity and efficient operation
"The volume of the large liquid storage tank reaches 16L, far exceeding the volume standard of 1l in the market, so as to ensure a greater space for action.
The atomization speed is 3L / h, far higher than the market standard of 0.24l/h, ensuring more efficient operation.
The scanning radius of V chassis can reach 25m, and the map can be constructed quickly.
MULTI-TERMINAL OPERATION WITH HIGH EFFICIENCY AND LOW RISK:
Each machine is equipped with an iPad to remotely control the robot to creates an environment map,
The robot has a 12-inch high clear screen to control the robot operation, and support to view work records, convenient, and understand the disinfection situation.
Each customer has an independent account, which can be accessed from master management robot factors, points, and regions are defined.
IR temperature detection
Automatic telescopic track
Improve disinfection space
12" touch screen monitor
Filler cap on the side for easy refilling
Different ambient lights improving the experience
cloud be used for promotion
Adjustable 6-hole automatic lifting nozzle 360-degree spray
To improve the disinfection effect
Arc design easy to push
Liquid Storage Tank
Ultrasonic Sensors Lidar navigation Independent navigation
Dimensions: 54cm*54*110cm lifting head up to 150cm.
WiFi: 2.4 G 802.11 B/b/n.
Screen Size: 12inch.
Stand by time: 12 hours.
Navigation Accuracy: 5cm.